Tips for Developing Astute Investing Skills

Learn to discern conflicting analyses, reports, and data as you research investing opportunities

As an investor, you must make decisions based on your study, research, and personal opinions and beliefs. You should not depend solely on the research and opinions of others. There is much good advice and information available to you.

However, there’s also a lot of differing information that you must cut through to make informed investing decisions. Here’s what you can start doing now:

Understand decisions made by entities independent of publicly traded companies

General Electric (NYSE:GE), through its Power & Water division, GE Hitachi, offers advanced and sophisticated technology for the nuclear energy industry. The GE Hitachi nuclear alliance unites GE’s design expertise and history supplying reactors, fuels, and services worldwide with Hitachi’s proven experience in advanced modular construction. This is all well and good.

Nonetheless, previously, the Canadian Press noted that, “A Federal Court ruling has thrown out the preliminary approvals for a series of new nuclear power reactors in Ontario.” Therefore, this is a case of weighing company initiatives against the landscape and mindset of the jurisdiction in which they operate, or may wish to operate with new projects. You must be aware of this when you invest.Understand the difference between company outlooks and what’s going on in the marketplace

Cameco (TSX:CCO) (NYSE:CCJ), regarding its long-term prospects was very positive about its outlook and the outlook for the uranium industry in general. The company did say in its 2013 annual report that any development or expansion of its remaining projects would depend on how market conditions develop. Cameco’s intention is to build up Cigar Lake and to expand the McArthur River/Key Lake operation.

Commercial production commenced in May 2015 at Cigar Lake with a total of 11.3 million pounds (100% basis) produced by the end of the year. The expectation is that the build up to licensed capacity of 18 million pounds per year will be in 2017.

What’s’ happening in the marketplace? In 2014, Mining.com reported that poor markets caused Cameco to put its Millennium uranium mine on hold. The highly prospective Millennium deposit is on the shores of Slush Lake in Saskatchewan. Cameco had asked the Canadian Nuclear Safety Commission (CNSC) to postpone a hearing scheduled in June 2014 into a licence application for the Millennium Mine project. The estimation is that this project has in excess of 50 million pounds of uranium.

Consider company strategies and the new economy

Sears Canada (TSX:SCC) Sears Holdings (NASDAQ:SHLD) never seemed to transform its operations as other retailers. Sears Canada dispensed some of its best stores and raised hundreds of millions of dollars in the process. Sears Canada was a mainstay in Canadian downtowns and major shopping malls.

The Company’s Toronto Eaton Centre flagship store became a Nordstrom (NYSE:JWN) store. Sears Canada has seen its target consumers taken away by bulk stores and higher-end retailers, not competing with them effectively.

Consider government reports

These are reports prepared by any level of government: federal, provincial/state, or regional or municipal. Oftentimes, federal government pronouncements paint a rosier picture than what is really happening in the economy. This is especially true at election time. You must look at what other government agencies are saying, not just the political figureheads of parties. Consider what U.S Federal Reserve Chairman Janet Yellen said in the past. She told the Joint Economic Committee of Congress that under present policies, the federal government’s deficits, “will rise to unsustainable levels.”

As an investor, you must consider what that will do to the U.S economy, the business environment, and businesses. By extension, what will this do in the coming years to Canada’s? When the U.S. rolls over, it typically nudges Canada who’s napping on its shoulder.

Due diligence means more than just studying the latest quarterly results of companies. It means studying and discerning between different government, economic, as well as marketplace reports that often are contradictory. It’s your responsibility to discern between the wheat and the chaff. If this means taking longer to make an investment decision, so be it. In the end, you will make a better investment decision.

Art of filmmaking has come along way since the invention of cinematograph, the first camera that can record motion pictures. Since then, not a lot of people saw this medium as an art, most perceived it as a profitable investment due to its entertainm Director of photography DC Using the technology available to me is very important in achieving the styles I want in these videos.
Posted in Uncategorized | Comments Off on Tips for Developing Astute Investing Skills

Autodesk : Top 4 New Features

Autodesk introduced AutoCAD 2017 in March 2016 aiming to help its users stay at the forefront. This latest release lets you work quicker and smarter across connected desktop and mobile solutions, create personalized design experiences, easily team up with colleagues, and stay updated with the latest features and updates. AutoCAD 2017 also includes AutoCAD 360 Pro, a mobile app that allows users use AutoCAD on the go. The latest version addresses several user functionality requests and delivers features that enhance everything from workflows to graphics processing. According to Autodesk, several AutoCAD users globally will be benefitted by several enhancements that have been added in the latest version, such as enhanced 3D printing, new features such as ‘smart centrelines’, share design views on cloud and improvements to PDF handling features.

In the updated features of the 2017 version, PDFs have been added to the supported ‘import file’ formats. As a result, users can import geometry, True Type text and raster images from a PDF file or underlay into the current drawing as AutoCAD objects. Also, the centerlines and center marks get updated accordingly when users move associated objects. Learning content and product updates are seamlessly delivered to help users get the most out of new features with Autodesk Desktop app, an application that substitutes Autodesk Application Manager. Here, users also tend to get the latest security patches and updates for all 2015, 2016, and 2017 versions of Microsoft Windows based Autodesk products. Now, let’s discuss the top 4 new features that Autodesk has included in its AutoCAD 2017 release. Top 4 New Features in Autodesk AutoCAD 2017

Enhanced 3D printing

Utilising the new Autodesk print studio you can create a 3D print ready file and directly print it in nearly all types of 3D printers. This 3D printing tool is offered by spark technologies and is available for 64 bit machines only. To make full use of this tool, you need to go to AutoCAD 3D modelling workspace and select print studio tool from 3D print panel of output tab. If it’s the first time you are using this tool then a prompt will appear from where you can download this tool. After you’ve downloaded and installed, click on print studio again and click on watertight or closed mesh object from your drawing which you want to use for 3D printing.

Smart Centrelines and Centre marks

This new AutoCAD release lets you to easily add centre lines and centre marks to the geometry. Likewise, you need to type the command ‘Centremark’ and click on circular object to create the centre mark, you can use this command to make a centre mark on circle, arc and fillet. Share Design Views on Cloud

Now, you can directly share files with users who don’t even have AutoCAD using A360 cloud account and all they require is a web browser for accessing shared drawing. In order to share a drawing, ensure that you’re logged into your Autodesk 360 cloud and your drawing is saved.

Co-ordination Model

In AutoCAD 2017 coordination model functionality has been improved with support for object snaps. Attach a Navisworks or BIM 360 Glue model to your AutoCAD drawing so you can view it as an underlay. Then just use the standard AutoCAD endpoint and center object snaps to snap to exact locations as you create and edit your design based on the attached models.

Posted in Uncategorized | Comments Off on Autodesk : Top 4 New Features

Caribbean Travel – Why Visit ?

Barbados is a beautiful tropical island, with plenty of cultures around to satisfy all kinds of travelers. The location is so beautiful that you will instantly fall in love with it. The turquoise waters of the Caribbean, the budding Port of Bridgetown, secluded quaint and beaches, British communities with past times ranging from mid-afternoon tea sessions up to the on-going games of cricket. But apart from this, many travelers want to know what are some of the other things which one can enjoy at this beautiful location. Here are some reasons why I feel Barbados is the best place to spend a quality vacation.

The Turquoise Beaches There is no doubt in this fact that Barbados is home to some of the most amazing beaches in the world. As an island, this location is surrounded by water and has the most fascinating beaches in the world, which is it’s most loved attraction. It is something that must be experienced by all as there is something for everyone. Those who love to surf can head to the East Coast of the island, and those who want to relax or go for a swim can head to the South and West coast beaches.

The Food Is Delicious

Barbados has earned the title of “culinary capital of the Caribbean”, and it has earned it rightfully. This place is a heaven for food lovers, from street food to fine dining you can experience it all here. You can stop at rum shop for ham, cheese cutters or fish cakes, or you can head to a nice restaurant enjoy best fish dishes on the island along with sidelines like macaroni pie.

The Locals Are Friendly

The locals are one of the most priced treasures of this destination. They are popular in the world as the friendliest people, who will always help in making your vacations enjoyable. They love sharing stories about the island’s culture and teaching others about how things work in their country Things To Do

You will never get bored in Barbados! There are a lot of fun activities to do here, like the ones mentioned below:

• Explore Harrisons Cave.

• Go on a boat trip to explore the island’s reefs and swim with the fishes and turtles.

• Go for safari tour, glass bottom tours and The Boat Yard.

• Make sure you also check out the nightlife.

The Weather

The weather here stays warm all year round. The temperature here is usually around 85 degrees with steady and fresh tropical breezes.

Posted in Uncategorized | Comments Off on Caribbean Travel – Why Visit ?

How Do I Discover My Purpose? Start By Asking Yourself These 3 Questions

One of the biggest questions I hear is, “What is my purpose?”

In reality, there are only two people who can really tell you what your purpose is you and God.

What is purpose?

Your purpose is the plan God has for you, the reason why He has created to live on this earth.

He can tell you because He created you and He made a specific purpose just for you. As you seek to know God more, and learn His plan for your life, you can discover this purpose. Contrary to what many people believe, you are not here just to take up space, meander around, watch reality TV, be miserable, or even eat chocolate.

God has so much more for you. He wants you to love your life by discovering your purpose and walking it out on consistent basis.

God also wants you to connect with Him and join Him where He is already working.

This requires you to be able to:
• Have a relationship with Him through faith in Jesus Christ
• Experience an intimate relationship with Him
• Learn to hear His voice

If you want to fulfill your purpose for 2017, I encourage you to take a quick mental inventory of what you have. Then 3 questions to ask yourself include:
• What 5 things do I want to change about myself in this year? This could include your job, a relationship, a personal goal, certain habits, etc.
• What people/things do I need to get rid of so I can pursue my purpose?
• What negative mindsets do I need to get rid of? If you are honest with yourself, you can experience areas of growth so you can pursue your purpose.

I would also recommend you find an accountability partner or hire a life purpose coach to help you to see where you are and how you can get closer to pursuing your purpose.

Posted in Uncategorized | Comments Off on How Do I Discover My Purpose? Start By Asking Yourself These 3 Questions

Are You at Risk of Being “Uberized”?

If you’re like many Business Owners and Leaders you probably feel pretty good about the position you hold in your market… so did the taxi cab companies and drivers before Uber became a reality. Now they are scrambling and trying to find a way to survive… even to the point of trying to get political help in different cities to stay afloat.

Disruption and Commoditization have impacted virtually every industry today. There probably isn’t a single industry that hasn’t been impacted by a disruptive organization entering their market and stealing some of their market share. Uber is an excellent example but there are many others that have been equally disruptive. Companies such as LegalZoom have taken billions of dollars away from attorneys over the past several years. They captured and disrupted a document and transaction-based business and turned it into a commodity by substantially lowering the pricing of document preparation… impacting attorneys all over the country.

Amazon was an early disruptor to the entire book business… taking significant market share away from Barnes and Noble and Borders who were recognized giants in the book industry. And we certainly can’t forget about Blockbuster’s demise when Netflix entered the market. They were the unquestioned dominant leader in video rental and were virtually replaced overnight by an unknown company with a new disruptive business model that matched the needs of customers at substantial savings.

Even though these examples are in completely different industries there is one common thread that runs through all of them… they didn’t believe anyone could disrupt their dominance in their market. While it’s awesome to believe in your product or service, it’s dangerous to think there isn’t someone waiting in the wings to take away your position. Unlike any other time in history, we are now seeing new companies coming into traditional industries from many unrelated areas and establishing a disruptive model and capturing significant market share. This trend is only going to continue now that it has shown massive success over the past few years. So what can you do, as the leader of your business, to either avoid or minimize the impact of this potential disruption?

While commoditization is difficult to combat with products and services over a long period of time, there is at least one alternative that appears to withstand the test of time and delivers differentiation in the market… your CUSTOMER EXPERIENCE.

It is difficult to continually come up with new products and services to satisfy the ravenous appetite customers have today. Just when you think you have the best and leading edge product or newest service, someone comes in and “one-ups” you and takes away the leading spot. While you might remain there for some period of time, it is difficult to remain at the top for extended periods of time. Apple is one of the few that has been successful at this… but it took them many years of living in the shadow of Microsoft and others before they became the dominant leader. Today, Microsoft is in this unenviable position and trying to fight their way back to the top… especially in the race for the Cloud.

But these are behemoth companies… not the SMB market. They can throw billions of dollars at innovation and products and hope they find a winner. The small and mid-sized business (SMB) can’t be this frivolous with their cash and making too many product/service mistakes can wipe out a business before anything comes to fruition. The proven alternative to this madness is to focus on the ONE THING that is completely in their control to design and deliver… their CUSTOMER EXPERIENCE.

Customer Experience has both short and long term advantages. It is something that can be created and implemented within the year but last for many decades to come when implemented properly. And by properly I’m not talking about telling all your employees they need to be nicer to the customer… that never works for the long term… every company can be nice to their customers if they try. This isn’t the answer… this isn’t the differentiator… but it’s on the right track.

Creating a customized CUSTOMER JOURNEY that is built upon a very well defined Customer Experience Process (something we call Customer Experience Mapping) is what allows companies to reap these rewards for many years into the future. Think Disney… they created “the happiest place on earth” and continue to deliver this experience year after year after year. This didn’t happen by holding a meeting and telling all their employees and characters to be nicer to their guests… it happened because they have a very well defined Customer Journey that is built on a foundation of a well-designed and executed Customer Experience.

Nordstrom did the same thing many decades ago. They started selling shoes… then clothing… all at high prices. But they started with a very distinct process inside the organization for delivering an incredible customer experience day in and day out. Zappos followed this same model… sold shoes… one of the ultimate commodities in the clothing industry… and they dominate today. They don’t give discounts and silly things like “one day only” sales (every day)… they simply deliver a remarkable Customer Experience to every customer every day… and their customers love to buy from Zappos. And it has worked out pretty well when you consider they went from zero to over $1 Billion in revenues in less than 10 years and were sold to Amazon for more than a billion dollars. Not a bad model if you ask me.

One way to avoid being COMMODITIZED and losing customers is to design something even new entrants can’t copy… the experience you offer. If your Customer Experience is so incredibly amazing and remarkable… WOW… every single day with every interaction, this creates immediate differentiation and a long tail of success. It is the ultimate weapon against commoditization or even new entrants into a market. For a new disruptive entrant to take away market share they would need to be so much better and cheaper than anything you offered… which is difficult to do today. And for those of you that are saying to yourself right now, “Yea but we’re different, we do a good quality job and treat our customers well so we aren’t at risk,” I would offer you some instant advice… take the blinders off and get real with looking at your business. This is living in a fantasy world… this isn’t looking at your company from the eyes of your customer… they are seeing something very different. And if someone came into your market today and offered a completely different (and awesome) experience to your customers at or below your price they would be gone in a heartbeat.

Achieving long-term dominance doesn’t happen by “being nicer to your customers” and thinking you have created differentiation… you haven’t. Being CUSTOMER OBSESSED and creating a process based CUSTOMER JOURNEY that has a well laid out and documented CUSTOMER EXPERIENCE PROCESS at the heart of it is what will help you avoid being “Uberized.” This strategy gives you differentiation, uniqueness, and a special place in your customers heart and mind… it gives you the “long tail” of success.

I would strongly and passionately encourage you to learn more about why and how this is completely different than what you are probably doing today. If there was ONE THING TO FOCUS ON IN 2017 it would be to create a strategy based around a well-planned Customer Journey which incorporated an incredibly awesome Customer Experience by Mapping out all the experiences your customer will receive when they interact with your business (there are usually over 20 for most companies in the SMB market). If this is of interest and you want to learn more, let’s grab coffee and I can share how some of the best companies in the world have followed this path… for decades… and still dominate in their industries. I think you will find it a fascinating discussion…

Posted in Uncategorized | Comments Off on Are You at Risk of Being “Uberized”?